Results 1 to 4 of 4

Thread: SNMPv3

  1. #1
    Junior Member
    Join Date
    Apr 2013
    Posts
    10

    SNMPv3

    Hi,
    I had an ASA from cisco that I would monitor. I got no problem when I do it with SNMPv2c and the template cisco , router .
    But I would do it with SNMPv3 but I don't know where I have to put the user , the SHA auth en the priv AES.
    Thanks a lot for your help,


  2. #2
    Shinken project leader
    Join Date
    May 2011
    Location
    Bordeaux (France)
    Posts
    2,131

    Re: SNMPv3

    Are you sure the check plugin manage V3? If so, you will have to change the pack cfg file to add the V3 management, because it was designed for V2 only.
    No direct support by personal message. Please open a thread so everyone can see the solution

  3. #3
    Junior Member
    Join Date
    Apr 2013
    Posts
    10

    Re: SNMPv3

    Ok. Thanks a lot

  4. #4
    Junior Member
    Join Date
    Jun 2019
    Posts
    1
    Get registered yourself on this blog to keep yourself connected with this blog all the time. As this is telling clearly about the SNMPv3 to informed us. I hope you are doing very well but if you need more info about this then check https://www.igeekphone.com/phones-th...d-to-students/ and get more helpful info. I really adore and admire this blog for such information shared with us.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •