Page 1 of 2 12 LastLast
Results 1 to 10 of 20

Thread: Can't get results from Auto-discovery in version 0.8.1

  1. #1
    Junior Member
    Join Date
    Feb 2012
    Posts
    10

    Can't get results from Auto-discovery in version 0.8.1

    Hi,

    After trying several of the methods you provide (http://www.shinken-monitoring.org/wi...en_10min_start, tar README), I finally got a running install on 64 bit Ubuntu 11.10 via the contrib script. Hurray! You may want to remove or correct those other two references as they both seem broken.

    I have configured resources.cfg to a narrow but valid ip range, and the attached is what I get: namely checked 0 hosts. The Zenmap nmap tool with the same range settings finds 16 hosts (Quick scan).

    I haven't gone into the advanced page's contents as the basics don't seem to work.

    Any ideas?

    Thanks, TheCaptn


  2. #2
    Shinken project leader
    Join Date
    May 2011
    Location
    Bordeaux (France)
    Posts
    2,131

    Re: Can't get results from Auto-discovery in version 0.8.1

    How many time take the znmap tool to run on this range?

    Can you try with a 1.0rc1 version?
    No direct support by personal message. Please open a thread so everyone can see the solution

  3. #3
    Junior Member
    Join Date
    Feb 2012
    Posts
    10

    Re: Can't get results from Auto-discovery in version 0.8.1

    I can try that, although I am on the VPN now (I don't think nmap likes that, although OpenNMS is currently Discovering).

    However, I'm not sure the question is on track. as running the script takes a second or less. So, it seems to me the problem is higher up - nmap is not being executed.

    The Captn

  4. #4
    Shinken project leader
    Join Date
    May 2011
    Location
    Bordeaux (France)
    Posts
    2,131

    Re: Can't get results from Auto-discovery in version 0.8.1

    If it's few seconds yes, it won't be the problem I supposed. The 1.0rc got a bit more debug output, because here we don't really know what it doesn't like

    It's launched as root?
    No direct support by personal message. Please open a thread so everyone can see the solution

  5. #5
    Junior Member
    Join Date
    Feb 2012
    Posts
    10

    Re: Can't get results from Auto-discovery in version 0.8.1

    Yes, from sudo.

    How do you get the debug output/where is it?

    Thanks, The Captn

  6. #6
    Shinken project leader
    Join Date
    May 2011
    Location
    Bordeaux (France)
    Posts
    2,131

    Re: Can't get results from Auto-discovery in version 0.8.1

    Directly at launch, so if you are getting a 1.0rc1 version with no useful logs, we will have to launch the sub-process by ourself to see what is the problem

    Can you launch with a sudo with good nmaptargets :
    nmap_discovery_runner.py -t $NMAPTARGETS$

    We will see what make this runner script not happy
    No direct support by personal message. Please open a thread so everyone can see the solution

  7. #7
    Junior Member
    Join Date
    Feb 2012
    Posts
    10

    Re: Can't get results from Auto-discovery in version 0.8.1

    Sorry, the community installer is not working on that version. I uninstalled the old version, but I get this error:

    > Package unzip already installed
    > Package libmysqlclient-dev already installed
    > Module paramiko (paramiko) not found. Installing...
    > Module netifaces (netifaces) not found. Installing...
    > Module simplejson found.
    > Module pysqlite found.
    > Module MySQL_python (MySQLdb) not found. Installing...
    > Module pymongo (pymongo) not found. Installing...
    [FATAL] Unexpected error on line 418 in function check_distro (1)

  8. #8
    Senior Member
    Join Date
    Oct 2011
    Posts
    139

    Re: Can't get results from Auto-discovery in version 0.8.1

    Hi which ditro and version do you use ? (redhat/debian/ubuntu ....)
    could you post the content of the /tmp/shinken.install.log just after getting the error ?

  9. #9
    Junior Member
    Join Date
    Feb 2012
    Posts
    10

    Re: Can't get results from Auto-discovery in version 0.8.1

    Runing on 64 bit Ubuntu 11.10

    That file does not exist...

  10. #10
    Senior Member
    Join Date
    Oct 2011
    Posts
    139

    Re: Can't get results from Auto-discovery in version 0.8.1

    oh seems the archive you are using is a little bit old
    get the git version (master branch)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •